New medical 3D mixer to break the traditional mixing problems

      The application of medical 3D powder mixing involves the manufacturers and research institutes of various medicines and their related products. Through industry surveys and equipment application surveys, we understand the need for blending of pharmaceutical and pharmaceutical raw materials manufacturers. The current problem is that pharmaceutical companies need a new type of pharmaceutical-specific 3D mixer to solve the pharmaceutical and food powder mixing some of the problems. The urgent need to solve the problems are the following:

        1, the material is easy to hold the formation of fake particles particles, can not break up, affecting product quality;

        2, mixing large quantities of materials is difficult to mix;

        3, the current complex mixing process complicated, long mixing time;

        4, the current import trough mixer, cleaning and maintenance are not convenient;

        5, mixing uniformity and product quality can not be guaranteed.

      So they urgently need an efficient mixing device that can solve all the above problems, but so far no suitable mixer has been found. After the communication with our related technicians and the on-site operation of the equipment, we got a preliminary understanding of our double-motion 3D mixer:

       1, with a set of motive power to drive two sets of sports system: the full-size double-helical blade inside the cylinder, speed faster than the cylinder speed, you can break up the fake particles, open, to solve the problem of mixing materials;

       2, the original oblique inserted cartridge operation mode, along the inclined axis of rotation, eliminating dead materials;

       3, before and after the barrel has cleaning holes on both sides to facilitate thorough cleaning of the high-pressure water cannons deep inside the barrel. At the same time with a dedicated hot air interface, you can achieve the purpose of rapid drying;

       4, the equipment is easy to operate, double-motion superposition and mixing principle greatly improve the mixing uniformity, improve product quality.

        After communicating with the customer, the customer gave great affirmation to our double-motion three-dimensional mixer. Customers carried the materials for on-site experiments. After mixing experiments, the experimental results were very good and the mixed problems encountered were solved. Currently most suitable for the pharmaceutical industry's new hybrid equipment.