Technical consultation：
sales@drymixer.com
- 1. High Uniformity
- 2. Short mixing time,High Efficiency
- 3. 80% loading rate
- 4. Time saving,Energy saving,Space saving,Money saving.
- 5 Small damage to the original appearance of powders.
- 6. Solve the problem of ultra-fine powder mixing.
- 7. Solve the problem of light-heavy powder mixing.
- 8. Effectively solve the problem of uniform mixing diffuculty of trace elements
- 1. The important factor influenci
- 2. Particle size - an important
- 3. Powder fluidity is a double-edged sword
- 4. Pretreatment of powder mixture
- 5. Powder mixing principle introduce
- 6. Traditional powder mixers' adv
- 7. Selection of blending equipment
- 8. The basis of the uniform blending of powder
- 9. How to find the cause of mixing bad uniformity
- 10. Super light powder mixing precautions
- 11. Super fine powder mixing precautions
- 12. How to mix bad liquidity powder?
- 13. How to mix trace elements
- 14. A solution for powder's good
- 15. How does the dummy particles
Newsnews
Maintenance and Repair of 3D mixer Power System
input time：2016-04-22 16:37:20 hits：
Maintenance and Repair of 3D Hybrid Power System
1, three-dimensional mixer reducer, such as regular use, to be replaced every three months a new oil, the replacement should be cleaned with a new oil reducer.
2, three-dimensional mixer reducer bearing cap end of the axis of activity with blades, the shaft is equipped with oil cup lubrication, the use of each working class with a butter gun plus butter 1-2 times.
3, mechanical inspection 1-2 times a month on a regular basis, check the parts for the worm, worm, bearings, oil seals, the rotation is flexible part of the operation, fasteners are loose and found that anomalies should be promptly addressed.
4, during use, if it is found that three-dimensional mixer vibration abnormal or abnormal sound, should immediately stop checking.
5, electrical control parts should be clean and sensitive, found that the fault should be promptly repaired.
6, mixing pulp should be light demolition demolition demolition, stable, light, so as not to damage deformation.
7, after the use of three-dimensional mixer, should brush all parts of the machine residual material, deactivate a long time, the machine must be wiped clean all the parts surface coated with anti-rust oil, with a tarpaulin cover.
8, Lubrication: For the first time, it is necessary to clean the oil regularly to prevent the dirt from entering the gear box, affecting the service life of the whole machine. Mixed groove wall bearing back-end plus grease.
DIASRIOUTION NETWORK